Blind Spot Warning System Operation Description
- ADAS control unit enables BSW system.
- The ADAS control unit turns on the BSW system when it is turned ON by the integral switch.
- Side radar detects a vehicle in the adjacent lane and transmits the vehicle detection signal to ADAS control unit via ITS communication.
- ADAS control unit starts the control as follows, based on a vehicle detection signal, turn signal and dimmer signal transmitted from BCM via CAN communication:
- Blind Spot Warning indicator signal and Blind Spot Warning indicator dimmer signal transmission to side radar.
- Side radar transmits an indicator operation signal to the Blind Spot Warning indicator according to Blind Spot Warning indicator signal and Blind Spot Warning indicator dimmer signal.