Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Before replacing ADAS control unit, perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to DESCRIPTION .

Remove trunk side finisher (LH). Refer to REMOVAL AND INSTALLATION .
Remove nuts (A) from ADAS control unit bracket.

Fig 1: Identifying Nuts
Courtesy of NISSAN NORTH AMERICA, INC.
Disconnect harness connector from ADAS control unit and remove ADAS control unit from vehicle.