Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2016 >> Altima Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Unit Disassembly And Assembly >> Steering Gear And Linkage >> Disassembly And Assembly >> Assembly

Disassembly And Assembly: Assembly

  1. Adjust inner socket to standard length (L), and then tighten lock nut to the specified torque. Check length of inner socket (L) again after tightening inner socket lock nut. Make sure that the length is the standard.
    Fig 1: Adjusting Inner Socket To Standard Length L
    G04076779Courtesy of NISSAN NORTH AMERICA, INC.
    Inner socket length (L) : Refer to POWER STEERING GEAR .
    CAUTION:

    Adjust toe-in after this procedure. The length achieved after toe-in adjustment is not necessarily the above value.

scientia non olet · About Mike's Workshop Manuals