Component Inspection
- CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH
- Turn ignition switch OFF.
- Disconnect power window and door lock/unlock switch RH connector.
- Check power window and door lock/unlock switch RH terminals under the following conditions.
Power window and door lock/unlock switch RH Condition Continuity Terminal 7 8 UP Yes 6 11 7 12 NEUTRAL 6 11 7 12 DOWN 6 8 Is the inspection result normal?
YES
Inspection End.
NO
Replace power window and door lock/unlock switch RH. Refer to REMOVAL AND INSTALLATION .