Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2015 >> Versa Note SL >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System (With Intelligent Key) >> DTC/Circuit Diagnosis >> DTC B210F: Shift Position/Clutch Interlock Switch >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Shift selector lever to the P position.
    2. Turn ignition switch ON and wait 1 second or more.
    3. Shift selector lever to the N position and wait 1 second or more.
    4. Shift selector lever to the position other than P and N, and wait 1 second or more.
    5. Check DTC in "Self Diagnostic Result" of "IPDM E/R" using CONSULT.

    Is DTC detected?

    YES 

    Go to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End.

scientia non olet · About Mike's Workshop Manuals