Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2015 >> Rogue Select AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Airbag Control System >> DTC/Circuit Diagnosis >> DTC B00A0: Occupant Detection System Control Unit >> Diagnosis Procedure >> Diagnostic Procedure

Diagnostic Procedure

  1. CHECK HARNESS CONNECTOR

    Check the harness connector for disconnection, looseness or damage.

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO-1 

    Damage: Replace malfunctioning harness and connector.

    NO-2 

    Disconnection or looseness: Securely lock the connector.

  2. CHECK WIRING HARNESS

    Check the wiring harness externals.

    Is the inspection result normal?

    YES 

    GO TO STEP 3  .

    NO 

    Replace malfunctioning harness and connector.

  3. REPLACE OCCUPANT CLASSIFICATION SYSTEM CONTROL UNIT

    1. Replace occupant classification system control unit. Refer to REMOVAL AND INSTALLATION .
    2. Perform DTC confirmation procedure. Refer to DTC DESCRIPTION .

    Is DTC detected?

    YES 

    GO TO STEP 4  .

    NO 

    INSPECTION END

  4. REPLACE OCCUPANT CLASSIFICATION SYSTEM SENSOR

    1. Replace seat frame. Refer to EXPLODED VIEW .
    2. Perform DTC confirmation procedure. Refer to DTC DESCRIPTION .

    Is DTC detected?

    YES 

    GO TO STEP 5  .

    NO 

    INSPECTION END

  5. REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

    1. Replace air bag diagnosis sensor unit. Refer to REMOVAL AND INSTALLATION .
    2. Perform DTC confirmation procedure. Refer to DTC DESCRIPTION .

    Is DTC detected?

    YES 

    GO TO STEP   1  .

    NO 

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals