| Quick charge does not start. |
Quick charge start conditions are not satisfied. |
VCM recognizes that the selector lever is in a range other than P range. |
Electric shift system error. |
Perform self-diagnosis of electric shift control module. |
| - |
Power switch is not OFF. |
Normal operation. |
| - |
VCM receives a charge stop request signal from PDM (Power Delivery Module). |
Check that charging condition is normal. |
| VCM recognizes that the quick charge connector and the normal charge connector are simultaneously connected. |
Abnormal connection detection circuit of normal charge port. |
Check normal charge port. |
| Abnormal PDM (Power Delivery Module). |
Perform self-diagnosis of PDM (Power Delivery Module). |
| VCM prohibits charging. |
Fail-safe of VCM. |
FAIL-SAFE |
| VCM recognizes that the quick charge connector is not connected. |
Abnormal connection detection circuit of quick charge port. |
Check quick charge port. |
| Abnormal PDM (Power Delivery Module). |
Perform self-diagnosis of PDM (Power Delivery Module). |
| Quick charger does not permit quick charge. |
Quick charger detects insulation resistance degradation in high voltage circuit. |
Insulation resistance degradation between PDM (Power Delivery Module) and quick charger. |
- Check PDM (Power Delivery Module).
- Check high voltage harness.
- Check quick charge port.
- Check quick charger.
|