System Description

WARNING: This page is about a different variant/trim than selected.

INPUT/OUTPUT SIGNAL CHART

Sensor	Input signal to ECM		ECM function	Actuator
Brake pedal position switch	Brake pedal operation		ASCD vehicle speed control	Electric throttle control actuator
Stop lamp switch	Brake pedal operation
Clutch pedal position switch^{* 1}	Clutch pedal operation
ASCD steering switch	ASCD steering switch operation
Transmission range switch^{* 2}	Gear position
Park/neutral position (PNP) switch^{* 1}	Gear position
Combination meter	CAN communication	Vehicle speed signal
TCM^{* 2}	CAN communication	Output shaft revolution signal

* 1: M/T models

* 2: CVT models

BASIC ASCD SYSTEM

Refer to Owner's Manual for ASCD operating instructions.

Automatic Speed Control Device (ASCD) allows a driver to keep vehicle at predetermined constant speed without depressing accelerator pedal. Driver can set vehicle speed in advance between approximately 40 km/h (25 MPH) and 144 km/h (90 MPH).

ECM controls throttle angle of electric throttle control actuator to regulate engine speed.

Operation status of ASCD is indicated by CRUISE indicator and SET indicator in combination meter. If any malfunction occurs in ASCD system, it automatically deactivates control.

Refer to SWITCH NAME AND FUNCTION for ASCD operating instructions.

NOTE:

Always drive vehicle in safe manner according to traffic conditions and obey all traffic laws.