Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2015 >> Juke SL, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B210B: Starter Control Relay >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE:

If DTC B210B is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .

DTC No. Trouble Diagnosis Name DTC Detecting Condition Possible Cause
B210B STR CONT RLY ON CIRC When comparing the following items, IPDM E/R detects that starter control relay is stuck in the ON position for 5 seconds or more.
  • Starter control relay signal (CAN) from BCM
  • Starter relay status signal (CAN) from BCM
  • Starter control relay and starter relay status signal (IPDM E/R input)
  • Starter control relay control signal (IPDM E/R output)
  • P/N position signal input
  • Ignition power supply No. 2 signal from BCM
  • Harness or connectors

    (CAN communication line is open or shorted.

    (Ignition power supply No. 2 circuit is open or shorted.)

  • IPDM E/R
  • BCM
scientia non olet · About Mike's Workshop Manuals