Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2015 >> Juke SL, 4WD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B261F: ASCD Clutch Switch >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC B261F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B261F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .
DTC No. Trouble Diagnosis Name DTC Detection Condition Possible Cause
B261F ASCD CNCL/CLTCH SW BCM detects the following status for 10 seconds 3 times
  • Clutch pedal position switch input (CAN) from ECM: OFF
  • Vehicle speed: 40 km/h (24.8 MPH) or more
  • Harness or connectors.

    (CAN communication line is open or shorted.)

    (Clutch pedal position switch circuit is open or shorted.)

  • ABS actuator and electric unit (control unit)
  • Combination meter
  • BCM
scientia non olet · About Mike's Workshop Manuals