Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Versa S Plus >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Codes & Symptom Tests) >> DTC/Circuit Diagnosis >> Clutch Pedal Position Switch >> Component Function Check

Component Function Check

  1. CHECK CLUTCH PEDAL POSITION SWITCH FUNCTION 
    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector and ground.
      ECM Condition Voltage
      Connector + -
      Terminal
      E16 92 (Clutch pedal position switch signal) 108 Clutch pedal Fully released Approx. 0V
      Fully depressed Battery voltage

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals