Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Versa Note S Plus >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> DTC/Circuit Diagnosis >> DTC U1002: System Comm (Can) >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 

    With CONSULT

    1. Turn the ignition switch ON.
    2. Perform self diagnosis for "ABS".

      Is DTC "U1002" detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: Inspection End.

scientia non olet · About Mike's Workshop Manuals