Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue Select AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Power Control System (Power Distribution System)) >> Symptom Diagnosis >> Push-Button Ignition Switch Does Not Operate >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM WORK SUPPORT 

    Perform "INSIDE ANT DIAGNOSIS" on Work Support of "INTELLIGENT KEY".

    Refer to "INTELLIGENT KEY: CONSULT FUNCTION (BCM - INTELLIGENT KEY) ".

    : GO TO 2.

  2. PERFORM SELF-DIAGNOSIS RESULT 

    Perform Self-Diagnosis Result of "BCM".

    Is DTC detected? 

    YES: Refer to "DTC INDEX ".

    NO: GO TO 3.

  3. CHECK PUSH-BUTTON IGNITION SWITCH 

    Check push-button ignition switch.

    Refer to "COMPONENT FUNCTION CHECK ".

    Is the operation normal? 

    YES: GO TO 4.

    NO: Repair or replace malfunctioning parts.

  4. CONFIRM THE OPERATION 

    Confirm the operation again.

    Is the inspection normal? 

    YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

    NO: GO TO  1.

scientia non olet · About Mike's Workshop Manuals