Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue Select AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Power Control System (Power Distribution System)) >> DTC/Circuit Diagnosis >> DTC B26F6: BCM >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B26F6 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B26F6 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
CONSULT Display DTC Detection Condition Possible Cause
BCM [B26F6] Ignition relay ON signal is not transmitted from IPDM E/R (CAN) when BCM turns ignition relay ON. BCM
scientia non olet · About Mike's Workshop Manuals