Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue Select AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Power Control System (Power Distribution System)) >> DTC/Circuit Diagnosis >> DTC B2616: Ignition Relay Circuit >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM SELF DIAGNOSTIC RESULT 
    1. Turn ignition switch ON under the following conditions, and wait for at least 1 second.
      • CVT selector lever is in the P (park) or N (neutral) position.
      • Release brake pedal
    2. Perform self diagnostic result.

      Is DTC B2616 detected? 

      YES: Refer to "DIAGNOSIS PROCEDURE ".

      NO: Inspection End.

scientia non olet · About Mike's Workshop Manuals