Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue Select AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Interior Lighting System) >> DTC/Circuit Diagnosis >> Push-Button Ignition Switch Illumination Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK PUSH-BUTTON IGNITION SWITCH ILLUMINATION OPERATION 

    CONSULT

    1. Turn the ignition switch ON.
    2. Select ENGINE SW ILLUMI of BCM (INTELLGENT KEY) active test item.
    3. While operating the test item, check that the push-button ignition switch illumination turns ON/OFF

      ON: Push-button ignition switch illumination ON 

      OFF: Push-button ignition switch illumination OFF 

      Is the inspection result normal? 

      YES: Push-button ignition switch illumination circuit is normal.

      NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals