Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue Select AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Brake Control System) >> DTC/Circuit Diagnosis >> Brake Warning Lamp >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BRAKE WARNING LAMP FUNCTION (1) 

    Check that brake warning lamp in combination meter turns ON for approximately 2 seconds after ignition switch is turned ON.

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

  2. CHECK BRAKE WARNING LAMP FUNCTION (2) 

    Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated.

    Is the inspection result normal? 

    YES: GO TO 3.

    NO: Check parking brake switch system. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals