Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue Select AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Security Control System (With Intelligent Key)) >> DTC/Circuit Diagnosis >> DTC B2601: Shift Position >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B2601 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B2601 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B2601 SHIFT P SIGNAL When there is a difference between P range signal from CVT shift selector (park position switch) and P position signal from IPDM E/R (CAN).
  • Harness or connectors (CAN communication line is open or shorted.)
  • Harness or connectors [CVT shift selector (park position switch) circuit is open or shorted.]
  • IPDM E/R
  • BCM
scientia non olet · About Mike's Workshop Manuals