Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue Select AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (IPDM/Er) >> System Description >> Diagnosis System (IPDM E/R) >> CONSULT Function (IPDM E/R) >> Data Monitor

Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
Monitor Item [Unit] MAIN SIGNALS Description
MOTOR FAN REQ [1 - 4] X Displays the value of the cooling fan speed signal received from ECM via CAN communication.
AC COMP REQ [Off/On] X Displays the status of the A/C compressor request signal received from ECM via CAN communication.
TAIL&CLR REQ [Off/On] X Displays the status of the position light request signal received from BCM via CAN communication.
HL LO REQ [Off/On] X Displays the status of the low beam request signal received from BCM via CAN communication.
HL HI REQ [Off/On] X Displays the status of the high beam request signal received from BCM via CAN communication.
FR FOG REQ [Off/On] X Displays the status of the front fog light request signal received from BCM via CAN communication.
NOTE: This item is monitored only the vehicle with front fog lamp system.
FR WIP REQ [Stop/1LOW/Low/Hi] X Displays the status of the front wiper request signal received from BCM via CAN communication.
WIP AUTO STOP [STOP P/ACT P] X Displays the status of the front wiper stop position signal judged by IPDM E/R.
WIP PROT [Off/BLOCK] X Displays the status of the front wiper fail-safe operation judged by IPDM E/R.
ST RLY REQ [Off/On]   Displays the status of the starter request signal.
IGN RLY [Off/On] X Displays the status of the ignition relay judged by IPDM E/R.
RR DEF REQ [Off/On] X Displays the status of the rear defogger request signal received from BCM via CAN communication.
OIL P SW [Open/Close]   Displays the status of the oil pressure switch judged by IPDM E/R.
DTRL REQ [Off/On]   Displays the status of the daytime running light request signal received from BCM via CAN communication.
NOTE: This item is monitored only the vehicle with daytime running light system.
HOOD SW [Off/On]   Displays the status of the hood switch judged by IPDM E/R.
NOTE: This item is monitored only the vehicle for Mexico.
THFT HRN REQ [Off/On]   Displays the status of the horn request signal by vehicle security system or panic alarm system received from BCM via CAN communication.
HORN CHIRP [Off/On]   Displays the status of the horn request signal by key fob LOCK operation received from BCM via CAN communication.