Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect SPORT mode switch harness connector.
3. Turn ignition switch ON.
4. Check voltage between SPORT mode switch harness connector terminals.

   SPORT mode switch			Voltage (Approx.)
   Connector	+	-
   	Terminal
   M2	6	8	5 V

   Is the inspection result normal? 

   YES: GO TO  6.

   NO: GO TO 2.

1. Turn ignition switch OFF.
2. Check the continuity between SPORT mode switch harness connector and ground.

   SPORT mode switch		-	Continuity
   Connector	Terminal
   M2	8	Ground	Existed

   Is the inspection result normal? 

   YES: GO TO 3.

   NO: Repair or replace damaged parts.

1. Disconnect combination meter harness connector M76.
2. Check continuity between combination meter harness connector terminal and SPORT mode switch harness connector terminal.

   Combination meter		SPORT mode switch		Continuity
   Connector	Terminal	Connector	Terminal
   M76	29	M2	6	Existed

   Is the inspection result normal? 

   YES: GO TO 4.

   NO: Repair or replace damaged parts.

Check continuity between combination meter harness connector terminal and SPORT mode switch harness connector terminal.

Is the inspection result normal? 

YES: GO TO 5.

NO: Repair or replace damaged parts.

1. Connect all of disconnected connectors.
2. Check input/output signal of combination meter. Refer to "REFERENCE VALUE ".

   Is the inspection result normal? 

   YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

   NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

Check SPORT mode switch. Refer to "COMPONENT INSPECTION ".

Is the inspection result normal? 

YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

NO: Replace SPORT mode switch. Refer to "REMOVAL AND INSTALLATION ".