Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Power Control System (Power Distribution System)) >> Symptom Diagnosis >> Push-Button Ignition Switch Does Not Operate >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM WORK SUPPORT

    Perform "INSIDE ANT DIAGNOSIS" in "Work support" of "INTELLIGENT KEY" with CONSULT. Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) .

    GO TO STEP 2  .

  2. PERFORM SELF DIAGNOSTIC RESULT

    Perform "Self Diagnostic Result" of "BCM" with CONSULT.

    Are any DTCs detected?

    YES 

    Refer to DTC INDEX .

    NO 

    GO TO STEP 3  .

  3. CHECK PUSH-BUTTON IGNITION SWITCH

    Check push-button ignition switch. Refer to COMPONENT INSPECTION .

    Is the inspection result normal?

    YES 

    Refer to INTERMITTENT INCIDENT .

    NO 

    Repair or replace malfunctioning parts.

scientia non olet · About Mike's Workshop Manuals