Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Driver Assistance System) >> Basic Inspection >> Action Test >> FCW >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FEB SYSTEM SETTING

    1. Start the engine.
    2. Check that the FEB system setting can be enabled/disabled on the vehicle information display.
    3. Turn OFF the ignition switch and wait for 30 seconds or more.
    4. Check that the previous setting is saved when the engine starts again.

    GO TO STEP 2  .

  2. CHECK FEB SYSTEM

    1. Enable the setting of the FEB system on the vehicle information display.
    2. Check FEB warning lamp is OFF.

    Inspection End.

scientia non olet · About Mike's Workshop Manuals