Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Power Control System (IPDM E/R)) >> System Description >> System >> Relay Control System >> Fail-Safe >> Can Communication Control - If No Can Communication Is Available With BCM

Can Communication Control - If No Can Communication Is Available With BCM

WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.
Control part Fail-safe operation
Front wiper motor
  • The status just before activation of fail-safe control is maintained until the ignition switch is turned OFF while the front wiper is operating at LO or HI speed.
  • The wiper is operated at LO speed until the ignition switch is turned OFF if the fail-safe control is activated while the front wiper is set in the INT mode and the front wiper motor is operating.
  • Returns automatically wiper to stop position when ignition switch is turned ON if fail-safe control is activated while front wiper motor is operated and wiper stop in the other position than stop position.
Horn Horn OFF
Ignition relay-1 The status just before activation of fail-safe is maintained.
Starter motor Starter relay OFF
scientia non olet · About Mike's Workshop Manuals