Work Procedure

WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.

WRITING MODE SELECTION

CONSULT Configuration

Select "CONFIGURATION" of IPDM E/R.

GO TO STEP 2 .

PERFORM "MANUAL CONFIGURATION"

CONSULT Configuration
1. Select "MANUAL CONFIGURATION".
2. Identify the correct model and configuration list. Refer to CONFIGURATION LIST .
  CAUTION:
  - Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct.
  - Make sure to select "SETTING" even if the indicated configuration of brand new IPDM E/R is same as the desirable configuration. If not, configuration which is set automatically by selecting vehicle model cannot be memorized
3. Sets the displayed item and then select "NEXT".
  NOTE:
  If item is not displayed, select "NEXT".
4. Check that the configuration has been successfully written and touch "End".
GO TO STEP 3 .

OPERATION CHECK

Confirm that each function controlled by IPDM E/R operates normally.

Work End.