Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Codes & Symptom Tests) >> DTC/Circuit Diagnosis >> DTC P1715: Input Speed Sensor >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. CHECK DTC PRIORITY 

    If DTC P1715 is displayed with DTC UXXXX, P0335, P0340, P0603, P0604, P0605, P606, P0607, P060A, or P060B, first perform the trouble diagnosis for DTC UXXXX, P0335, P0340, P0603, P0604, P0605, P606, P0607, P060A, or P060B.

    Is applicable DTC detected? 

    YES: Perform diagnosis of applicable. Refer to "DTC INDEX ".

    NO: GO TO 2.

  2. PRECONDITIONING 

    If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

      : GO TO 3.

  3. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start engine and drive the vehicle at more than 50 km/h (31 MPH) for at least 5 seconds.
      CAUTION: Always drive vehicle at a safe speed.
    2. Check 1st trip DTC.

      Is 1st trip DTC detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals