Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Codes & Symptom Tests) >> DTC/Circuit Diagnosis >> Cooling Fan >> Component Function Check

Component Function Check

  1. CHECK COOLING FAN FUNCTION 

    With CONSULT 

    1. Turn ignition switch ON.
    2. Perform "COOLING FAN (DUAL)" in "ACTIVE TEST" mode of "IPDM E/R" using CONSULT.
    3. Touch "LOW", "HI" on the CONSULT screen.
    4. Check that cooling fan operates.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Proceed to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals