Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Rogue SL, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> Removal And Installation >> Main Power Window And Door Lock/Unlock Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the front door pull handle bracket (LH). Refer to "REMOVAL AND INSTALLATION ".
  2. Release pawls using a suitable tool (A) and remove main power window and door lock/unlock switch finisher (1).
    Fig 1: Removing Main Power Window And Door Lock/Unlock Switch Finisher Using Tool
    G09156900Courtesy of NISSAN NORTH AMERICA, INC.
  3. Disconnect the harness connectors from the main power window and door lock/unlock switch.
  4. Release the pawls, then separate the main power window and door lock/unlock switch (1) from the switch finisher (2).
    Fig 2: Identifying Door Lock/Unlock Switch And Switch Finisher
    G09156901Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals