Inspection Procedure

CHECK REAR VIEW CAMERA WASHER/AIR BLOWER FUNCTION
1. Start the engine.
2. Select the "Active Test" item "AIR&WASH ACTIVE" of "AVM" with CONSULT.
  NOTE:
  Before function check, perform the following items:
  - Fill with washer fluid.
  - Perform "Active Test" item "WASH ACTIVE" of "AVM" with CONSULT for 4 seconds.
3. While operating the test item, check the operation.
  Is it properly operated?
  
  Washer fluid ejects 4 - 6 times. (Normal function): Inspection End.
  
  Washer fluid ejects 7 times or more.: Properly install or replace air tube.
  
  Washer fluid ejects only once: Properly install or replace air tube.
  
  Washer fluid does not eject: Properly install washer tube or replace washer tube and check valve.