Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS U0101 To P0183 (Except CROSSCABRIOLET) >> DTC P0181: FTT Sensor >> Component Inspection

Component Inspection

  1. CHECK FUEL TANK TEMPERATURE SENSOR 
    1. Turn ignition switch OFF.
    2. Remove fuel level sensor unit. Refer to "EXPLODED VIEW ".
    3. Check resistance between "fuel level sensor unit and fuel pump" terminals by heating with hot water as shown in the figure.
      Terminals Condition Resistance
      4 and 5 Temperature [°C (°F)] 20 (68) 2.3 - 2.7 kΩ
      50 (122) 0.79 - 0.90 kΩ

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace "fuel level sensor unit and fuel pump". Refer to "EXPLODED VIEW ".

      Fig 1: Checking Fuel Tank Temperature Sensor
      G09561481Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals