Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Leaf SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (EV Control System (Introduction)) >> System Description >> Diagnosis System (VCM) >> CONSULT Function >> Active Test Mode

Active Test Mode

WARNING: This page is about a different car, the 2013 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
TEST ITEM

TEST ITEM CONDITION JUDGMENT CHECK ITEM (REMEDY)
PLUG IN INDICATOR
  • POWER ON
  • This turns ON and OFF the indicator used by the ACTIVE TEST.
 This confirms the indicator is ON/OFF.
  • VCM
  • Combination meter
  • CAN communication
CHARGE STAT INDICATOR 1
  • POWER ON
  • This turns ON and OFF the indicator used by the ACTIVE TEST.
 This confirms the indicator is ON/OFF.
  • Harness and connectors
  • Bulb and LED
  • VCM
CHARGE STAT INDICATOR 2
  • POWER ON
  • This turns ON and OFF the indicator used by the ACTIVE TEST.
 This confirms the indicator is ON/OFF.
  • Harness and connectors
  • Bulb and LED
  • VCM
CHARGE STAT INDICATOR 3
  • POWER ON
  • This turns ON and OFF the indicator used by the ACTIVE TEST.
 This confirms the indicator is ON/OFF.
  • Harness and connectors
  • Bulb and LED
  • VCM
F/S CHG RLY
  • POWER ON
  • This turns ON and OFF the F/S CHG relay used by the ACTIVE TEST.
 Check that the F/S CHG relay makes the operating sound.
  • Harness and connectors
  • F/S CHG relay
  • VCM
REVERSE LAMP RLY
  • POWER ON
  • This turns ON and OFF the reverse lamp relay used by the ACTIVE TEST.
  • Check that the reverse lamp relay makes the operating sound.
  • Check that the reverse lamp is turned ON.
  • Harness and connectors
  • Bulb and LED
  • Reverse lamp relay
  • VCM
DC/DC CONV DUTY
  • READY ON
  • This changes the duty ratio used by the ACTIVE TEST.
 Check that the 12V battery power supply voltage changes.
  • DC/DC converter
  • VCM
  • CAN communication
VOLTAGE CONTROL
  • POWER ON
  • This changes the voltage used by the ACTIVE TEST.
 Check that the 12V battery power supply voltage changes.
  • DC/DC converter
  • VCM
  • CAN communication
READY INDICATOR
  • POWER ON
  • This turns ON and OFF the indicator used by the ACTIVE TEST.
 This confirms the indicator is ON/OFF.
  • VCM
  • Combination meter
  • CAN communication
POWER LIMITATION INDICATOR
  • POWER ON
  • This turns ON and OFF the indicator used by the ACTIVE TEST.
 This confirms the indicator is ON/OFF.
  • VCM
  • Combination meter
  • CAN communication
EV SYSTEM W/L
  • POWER ON
  • This turns ON and OFF the indicator used by the ACTIVE TEST.
 This confirms the indicator is ON/OFF.
  • VCM
  • Combination meter
  • CAN communication
12V BATTERY CHARGE W/L
  • POWER ON
  • This turns ON and OFF the indicator used by the ACTIVE TEST.
 This confirms the indicator is ON/OFF.
  • VCM
  • Combination meter
  • CAN communication
ECO INDICATOR
  • POWER ON
  • This changes the display value used by the ACTIVE TEST.
 Confirm that the ECO indicator display in the upper meter changes.
  • VCM
  • Combination meter
  • Upper meter
  • CAN communication
ECO TREE
  • POWER ON
  • This changes the display value used by the ACTIVE TEST.
 Confirm that the ECO tree display in the upper meter changes.
  • VCM
  • Combination meter
  • Upper meter
  • CAN communication
WATER PUMP 1
  • POWER ON
  • This turns changes the duty ratio used by the ACTIVE TEST.
 Check that the water pump operation speed changes.
  • Harness and connectors
  • Water pump
  • VCM
COOLING FAN
  • POWER ON
  • This turns changes the duty ratio used by the ACTIVE TEST.
 Check that the cooling fan operation speed changes.
  • Harness and connectors
  • Cooling fan system
  • VCM
scientia non olet · About Mike's Workshop Manuals