Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Leaf SL >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (Power Distribution System) >> DTC/Circuit Diagnosis >> DTC B26F6: BCM >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC B26F6 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B26F6 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
CONSULT Display DTC Detection Condition Possible Cause
IGN USM CONT [B26F6] Power switch ON signal (CAN) (ON) is not transmitted from IPDM E/R, when BCM turns ignition relay-1 ON [Transmit power switch ON signal (CAN) (ON)]. BCM
scientia non olet · About Mike's Workshop Manuals