Component Inspection

CHECK ASCD STEERING SWITCH

Check the resistance between combination switch harness connector terminals as per the following conditions.

Combination switch (Spiral cable)			Condition	Resistance (Approx.)
Connector	+	-
Connector	Terminals
M302	13	16	MAIN switch: Pressed	0 Ω
			CANCEL switch: Pressed	250 Ω
			COAST/SET switch: Pressed	660 Ω
			ACCEL/RES switch: Pressed	1, 480 Ω
			All ASCD steering switches: Released	4, 000 Ω

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ASCD steering switch. Refer to "EXPLODED VIEW ".