Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Frontier SL, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Security Control System) >> Removal And Installation >> Remote Keyless Entry Receiver >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2015 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front pillar upper finisher (RH). Refer to REMOVAL AND INSTALLATION .
  2. Remove the side ventilator grille (RH). Refer to REMOVAL AND INSTALLATION .
  3. Remove the upper glove box. Refer to REMOVAL AND INSTALLATION .
  4. Remove cluster lid D. Refer to REMOVAL AND INSTALLATION .
  5. Remove the remote keyless entry receiver bolt (A).
  6. Disconnect the harness connector (1) from the remote keyless entry receiver (2) and remove.
    Fig 1: Locating Harness Connector, Keyless Entry Receiver And Bolt
    G05930015Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals