Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2014 >> Altima Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> DTC/Circuit Diagnosis >> DTC B210D: Starter Relay >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B210D is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
  • If DTC B210D is displayed with DTC B2617, first perform the trouble diagnosis for DTC B2617. Refer to "DTC LOGIC ".
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210D STARTER RELAY ON CIRC When comparing the following items, IPDM E/R detects that starter control relay is stuck in the ON position for 5 second or more.
  • Starter control relay signal (CAN) from BCM
  • Starter relay status signal (CAN) from BCM
  • Starter control relay and starter relay status signal (IPDM E/R input)
  • Starter control relay control signal (IPDM E/R output)
  • Harness or connectors (starter motor relay control circuit open or short)
  • IPDM E/R
  • BCM
scientia non olet · About Mike's Workshop Manuals