Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2013 >> Xterra PRO-4X, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Unit Removal And Installation >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Removal and Installation >> Removal

Removal and Installation: Removal

CAUTION: Do not remove the relays from the IPDM E/R. Tampering with the relays may cause additional incidents with the vehicle.
  1. Disconnect negative battery terminal. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove IPDM E/R upper cover.
    Fig 1: Identifying IPDM E/R Upper Cover
    G04896821Courtesy of NISSAN NORTH AMERICA, INC.
  3. Release two clips and pull IPDM E/R up from case.
  4. Disconnect the harness connectors from the IPDM E/R and remove.
    Fig 2: Locating IPDM E/R Clips
    G04904363Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals