Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2013 >> Xterra PRO-4X, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> Removal And Installation >> Power Window Main Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Using a suitable tool, release the metal clip and pawls, then lift the main power window and door lock/unlock switch (1) from the front door finisher (LH).
    Fig 1: Identifying Power Window And Door Lock Switch Fixing Pawls And Metal Clips
    G08711965Courtesy of NISSAN NORTH AMERICA, INC.
  2. Disconnect the harness connectors, then remove the assembly from the door finisher.
  3. Remove the three screws (A) from the main power window and door lock/unlock switch (1), then separate it from the finisher (2).
scientia non olet · About Mike's Workshop Manuals