Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2013 >> Xterra PRO-4X, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> Removal And Installation >> Front Power Window Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Using a suitable tool, release the metal clip and pawls, then lift the front power window and door lock/unlock switch (1) from the front door finisher (RH).
    Fig 1: Identifying Power Window And Door Lock Switch Tabs
    G08711966Courtesy of NISSAN NORTH AMERICA, INC.
  2. Disconnect the harness connectors, then remove the assembly from the door finisher.
  3. Release the four tabs (A), two on each side, then separate the front power window and door lock/unlock switch (1) from the finisher (2).
scientia non olet · About Mike's Workshop Manuals