Removal And Installation: Removal
WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Release the pawls using a suitable tool and lift the main power window and door lock/unlock switch and finisher as an assembly and remove.
- Disconnect the harness connector from the main power window and door lock/unlock switch.
- Release the four pawls (two on each side) using a suitable tool, then separate the main power window and door lock/unlock switch (1) from the main power window and door lock switch finisher (2).
: Pawl
CAUTION:Do not bend back the pawls on the switch finisher too far or breakage may occur.