Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2013 >> Quest SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Control System - Component Testing) >> Ignition Signal >> Component Inspection (Condenser)

Component Inspection (Condenser)

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONDENSER
    1. Turn ignition switch OFF.
    2. Disconnect condenser harness connector.
    3. Check resistance between condenser terminals as per the following.
      TERMINALS RESISTANCE REFERENCE CHART

      Terminals Resistance
      1 and 2 Above 1 MΩ [at 25C° (77C°)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace condenser.

scientia non olet · About Mike's Workshop Manuals