Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2013 >> Murano SL, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Except CROSSCABRIOLET) >> DTC/Circuit Diagnosis >> DTC U1002: System Comm (Can) >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 
    1. Turn the ignition switch OFF to ON.
    2. Perform self-diagnosis for "ABS" with CONSULT.

      Is DTC "U1002" detected? 

      YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals