Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2013 >> Juke SL, FWD, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0130 To P0445 >> DTC P0335: CKP Sensor (Pos) >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE: If DTC P0340 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643.
Refer to "DTC LOGIC ".
DTC No. Trouble diagnosis name (Trouble diagnosis content) DTC detecting condition Possible cause
P0335 CKP SEN/CIRCUIT [Crankshaft position sensor (POS) circuit]
  • The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
  • The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
  • The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.
  • Harness or connectors [Crankshaft position sensor (POS) circuit is open or shorted.]
  • Crankshaft position sensor (POS)
  • Signal plate
scientia non olet · About Mike's Workshop Manuals