Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2013 >> Juke SL, FWD, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing, Periodic Maintenance And Removal And Installation >> Fuel Injector >> Component Inspection (Fuel Injector)

Component Inspection (Fuel Injector)

  1. CHECK FUEL INJECTOR 
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as per the following.
      Fuel injector Resistance
      + -
      Terminals
      1 2 1.44 - 1.73 Ω [at 10 - 60°C (50 - 140°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace malfunctioning fuel injector. "EXPLODED VIEW "

scientia non olet · About Mike's Workshop Manuals