Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Power Control System (Power Distribution System)) >> Removal And Installation >> Push Button Ignition Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the push button ignition switch (1) from cluster lid A using Tool (A).

    Tool number: - (J-46534) 

    Fig 1: Removing Push Button Ignition Switch From Cluster Lid A Using Tool
    G08441842Courtesy of NISSAN NORTH AMERICA, INC.
  2. Disconnect the electrical harness connector and remove the push button ignition switch.
scientia non olet · About Mike's Workshop Manuals