Test Item

ABS SOLENOID VALVE

• Select "Up", "Keep" and "Down". Then use screen monitor to check that solenoid valve operates as shown in the table below.

  Test item	Display item	Display ((2))
  		Up	Keep	Down
  FR RH SOL	FR RH IN SOL	Off	On	On
  	FR RH OUT SOL	Off	Off	On(1)
  	USV[FR-RL]	Off	Off	Off
  	HSV[FR-RL]	Off	Off	Off
  FR LH SOL	FR LH IN SOL	Off	On	On
  	FR LH OUT SOL	Off	Off	On(1)
  	USV[FL-RR]	Off	Off	Off
  	HSV[FL-RR]	Off	Off	Off
  RR RH SOL	RR RH IN SOL	Off	On	On
  	RR RH OUT SOL	Off	Off	On(1)
  	USV[FL-RR]	Off	Off	Off
  	HSV[FL-RR]	Off	Off	Off
  RR LH SOL	RR LH IN SOL	Off	On	On
  	RR LH OUT SOL	Off	Off	On(1)
  	USV[FR-RL]	Off	Off	Off
  	HSV[FR-RL]	Off	Off	Off
  (1) On for 1 to 2 seconds after the select, and then Off. (2) A brief moment of On/Off condition occurs every 20 seconds after ignition switch turned ON. This is not malfunction because it is an operation for checking.

ABS SOLENOID VALVE (ACT)

• Select "Up", "ACT UP" and "ACT KEEP". Then use screen monitor to check that solenoid valve operates as shown in the table below.

  Test item	Display item	Display ((2))
  		Up	ACT UP	ACT KEEP
  FR RH ABS SOLENOID (ACT)	FR RH IN SOL	Off	Off	Off
  	FR RH OUT SOL	Off	Off	Off
  	USV[FR-RL]	Off	On	On
  	HSV[FR-RL]	Off	On(1)	Off
  FR LH ABS SOLENOID (ACT)	FR LH IN SOL	Off	Off	Off
  	FR LH OUT SOL	Off	Off	Off
  	USV[FL-RR]	Off	On	On
  	HSV[FL-RR]	Off	On(1)	Off
  RR RH ABS SOLENOID (ACT)	RR RH IN SOL	Off	Off	Off
  	RR RH OUT SOL	Off	Off	Off
  	USV[FL-RR]	Off	On	On
  	HSV[FL-RR]	Off	On(1)	Off
  RR LH ABS SOLENOID (ACT)	RR LH IN SOL	Off	Off	Off
  	RR LH OUT SOL	Off	Off	Off
  	USV[FR-RL]	Off	On	On
  	HSV[FR-RL]	Off	On(1)	Off
  (1) On for 1 to 2 seconds after the touch, and then Off. (2) A brief moment of On/Off condition occurs every 20 seconds after ignition switch turned ON. This is not malfunction because it is an operation for checking.

ABS MOTOR

• Select "On" and "Off" of "ACTIVE TEST". Make sure motor relay and actuator relay operates as shown in table below.

  Test item	Display item	Display
  		On	Off
  ABS MOTOR	MOTOR RELAY	On	Off
  	ACTUATOR RLY ((1))	On	On
  (1) A brief moment of On/Off condition occurs every 20 seconds after ignition switch turned ON. This is not malfunction because it is an operation for checking.