Diagnosis Procedure

1. Turn ignition switch OFF.
2. Remove the intake air duct.
3. Check if foreign matter is caught between the throttle valve and the housing.

OK or NG 

OK: GO TO 2.

NG: Remove the foreign matter and clean the electric throttle control actuator inside, and then perform throttle valve closed position learning. Refer to "THROTTLE VALVE CLOSED POSITION LEARNING ".

Fig 1: Identifying Throttle Valve And Control Actuator

Courtesy of NISSAN NORTH AMERICA, INC.

1. Replace the electric throttle control actuator. Refer to "EXPLODED VIEW ".
2. Perform "THROTTLE VALVE CLOSED POSITION LEARNING ".
3. Perform "IDLE AIR VOLUME LEARNING ".

: INSPECTION END