Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Xterra PRO-4X, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0605 To P2A03 >> DTC P0850: PNP Switch >> Overall Function Check >> With GST

With GST

  1. Turn ignition switch ON.
  2. Check voltage between ECM terminal 102 (PNP signal) and ground under the following conditions.
    Condition (Gear position) Voltage V (Known-good data)
    P or N position (A/T)
    Neutral position (M/T)    		 Approx. 0
    Except above position BATTERY VOLTAGE (11 - 14V)
    Fig 1: Checking Voltage Between ECM Terminal 102 (PNP Signal) And Ground
    G04900583Courtesy of NISSAN NORTH AMERICA, INC.
  3. If NG, go to "DIAGNOSIS PROCEDURE ".
scientia non olet · About Mike's Workshop Manuals