Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Xterra PRO-4X, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System (With Intelligent Key System) >> Removal And Installation >> Remote Keyless Entry Receiver >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the front pillar upper finisher (RH). Refer to "COMPONENT ".
  2. Remove the side ventilator grille (RH). Refer to "EXPLODED VIEW ".
  3. Remove the instrument side finisher. Refer to "EXPLODED VIEW ".
  4. Remove the upper glove box. Refer to "EXPLODED VIEW ".
  5. Remove the bolt (A), disconnect the harness connector (1) and remove the remote keyless entry receiver (2).
    Fig 1: Identifying Harness Connector, Remote Keyless Entry Receiver And Bolt
    G05930015Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals