Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Versa SV >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Body Control System (Hatchback)) >> Service Information >> BCM (Body Control Module) >> CAN Communication Inspection Using CONSULT (Self-Diagnosis)

CAN Communication Inspection Using CONSULT (Self-Diagnosis)

WARNING: This page is about a different variant/trim than selected.
  1. SELF-DIAGNOSTIC RESULT CHECK
    1. Connect CONSULT and select "BCM" on "SELECT SYSTEM" screen.
    2. Select "BCM" on "SELECT TEST ITEM" screen, and select "SELF-DIAG RESULTS".
    3. Check display content in self-diagnostic results.
    CONSULT display code Diagnosis item
    U1000 INITIAL DIAG
    TRANSMIT DIAG
    ECM
    IPDM E/R
    METER/M&A
    I-KEY

    Contents displayed 

    No malfunction: Inspection End

    Malfunction in CAN communication system: After printing the monitor items, go to "CAN System". Refer to "TROUBLE DIAGNOSIS FLOW CHART ".

scientia non olet · About Mike's Workshop Manuals