Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Versa SV >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Body Control System) >> Service Information >> BCM (Body Control Module) >> Removal and Installation of BCM >> Installation

Removal and Installation of BCM: Installation

WARNING: This page is about a different car, the 2011 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:
  • When replacing BCM, perform "WRITE CONFIGURATION". Refer to "CONFIGURATION ".
  • When replacing BCM, perform the system initialization (NATS). Refer to the CONSULT-III OPERATION MANUAL  for the initialization procedure.
  • When replacing BCM, if new BCM does not come with key fobs attached, all existing key fobs must be re-registered. Refer to the CONSULT-III OPERATION  manual for the initialization procedure.
scientia non olet · About Mike's Workshop Manuals