Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Versa SL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 63 (Engine Control System - Component Testing (Sedan)) >> Refrigerant Pressure Sensor >> Component Function Check

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK REFRIGERANT PRESSURE SENSOR OVERALL FUNCTION
    1. Start engine and warm it up to normal operating temperature.
    2. Turn A/C switch and blower fan switch ON.
    3. Check the voltage between ECM harness connector and ground.
      ECM Voltage
      Connector Terminal
      + -
      E16 101 (Refrigerant pressure sensor signal) 98 1.0 - 4.0V

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals